the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

RS install question


Post ReplyPost New Topic
< Prev Topic Next Topic >
MikeHusain 
Copper - Posts: 139
Copper spacespace
Joined: April 10, 2003
Location: Pennsylvania, United States
Posted: September 24, 2004 at 9:47 AM / IP Logged  

I am going to install an autopage 850 rs in a maxima and I noticed that it has two accessory wires and 1 ign wire. The RS unit has two ing wires and 1 accessory wire.  Could I take the second ign wire coming from the RS unit and use it as a second accessory wire that the vehicle needs.  I wont use it as the heator blower motor, I am assuming the second accessory wire in the 2003 maxima is for the radio????   Do I even need to hook up the second acessory wire in the max?  I heard its best to power everything up just as the key does when turning the ign.  Thanks....

snguyen 
Silver - Posts: 281
Silver spacespace
Joined: October 09, 2003
Location: United States
Posted: September 24, 2004 at 6:38 PM / IP Logged  

I only remember that the 2003 nissan maximo only have one accessory wire.   (red)

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: September 24, 2004 at 8:46 PM / IP Logged  

You can' t use the 2nd IGN from the to power the 2nd ACC wire. These wires have different characteristics and output a 12 volt signal at different intervals of the key cylinder. Here is the wire colors and also the relay configuration to power up the 2nd ACC :

IGNITION|BLACK / YELLOW        |+  |ignition harness           

ACCESSORY|red                 |+  |ignition harness           
SECOND ACCESSORY|WHITE/ blue          |+  |ignition harness           

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
MikeHusain 
Copper - Posts: 139
Copper spacespace
Joined: April 10, 2003
Location: Pennsylvania, United States
Posted: October 05, 2004 at 3:01 PM / IP Logged  
I looked at the second accessory wire relay configuration, but I was wondering wouldnt it be better to ground pin 86, fuse 12 volt constant to pin 87, tap into accessory wire from alarm brain to pin 85, and out put to 2nd accessory wire using pin 30?  This is just an idea I had, I am sure you are absolutley right due to the fact that you have been doing this for a numerous amount of years.  Could you give me somefeed back about my possible 2nd accessory wire relay?  Thank you and I appreciate your time... Mike....

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, July 12, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer