clutch bypass for r/s on '01 chev. truck

Home / the12volt's Install Bay / Car Security and Convenience / clutch bypass for r/s on '01 chev. truck (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Sexified

Copper - Posts: 87

Joined: October 17, 2004

Location: Canada

Posted: October 25, 2004 at 2:22 PM / IP Logged

i am installing a compustar 1way am system on my truck and wonder if anyone can tell me or show me the correct way to trigger the clutch so that the truck will start.

there are 4 wires in the plug at the clutch switch near the firewall.

any help would be great.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 26, 2004 at 9:26 AM / IP Logged

First you have to determine which system you have. Use this diagram to help you:

Negative Clutch Bypass Circuit

Positive Clutch Bypass Circuit

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

riceman

Copper - Posts: 109

Joined: October 14, 2004

Posted: October 26, 2004 at 11:57 AM / IP Logged

If i remember correctely its one of Velocity Motors metention methods plus you have to test the wires ,two of those wires when the clutch is depressed send a starter signal through and the other two wires send either a positive or negative signal through when clutch is depressed you just have to depulicate it with relays. 87 on relay gets starter signal from side that get's the signal when clutch is not pressed, n is cranked, 30 out n tapped into the side that gets the starter signal when clutch is depressed ,tap 87 to 86 on relay, 85 goes to your negative status output of R.S hope that helps.

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 26, 2004 at 3:22 PM / IP Logged

U may want to add a Peripheral # NSS Neutral Safety ByPass also

RS has to have Stop & Go type feature

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clutch bypass for r/s on '01 chev. truck

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.