flashing lights 2002 Dodge Ram

Home / the12volt's Install Bay / Car Security and Convenience / flashing lights 2002 Dodge Ram (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ademarco

Member - Posts: 2

Joined: October 09, 2002

Location: United States

Posted: October 10, 2002 at 6:07 PM / IP Logged

On an alarm with a positive flashing light output, how do i wire parking lights on a 2002 Dodge Ram? Do I use a relay along with correct resistor? And if so, how is the relay and resistor wired to the the wire at the switch?

securinu

Silver - Posts: 772

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 15, 2002

Location: United States

Posted: October 10, 2002 at 7:36 PM / IP Logged

you can do that or there is a black / YELLOW wire in the big harness going out to the firewall . you will have to dig thru a lot of wires but you can tap this directly. the other way you mentioned is at the switch with a 330 ohm resistor to ground.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

flashing lights 2002 Dodge Ram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.