CS 2011RS IV Lock problem

Home / the12volt's Install Bay / Car Security and Convenience / CS 2011RS IV Lock problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

pimpster

Member - Posts: 2

Joined: November 29, 2004

Location: United States

Posted: November 29, 2004 at 12:28 PM / IP Logged

Hi,

I've been browsing these forums for a long time and they have been a great help.

I recently installed a crimestopper cs-2011rs on my olds and the unit is not giving and door pulses to the locks, I'm wondering if anyone ran into this problem before. I've installed a few of these and never ran into this. Maybe defective?

Thanks guys.

Pimp

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: November 29, 2004 at 9:30 PM / IP Logged

"the unit is not giving and door pulses to the locks"

not sure i follow you????

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

pimpster

Member - Posts: 2

Joined: November 29, 2004

Location: United States

Posted: November 29, 2004 at 11:33 PM / IP Logged

Ooops, sorry. The module is not giving any door pulses. when the system is armed its supposed to give a .75 12v pulse on the blue wire to trigger the door locks, its not doing it. same with the green wire for unlocking.

metaverse

Copper - Posts: 210

Joined: June 13, 2002

Location: United States

Posted: November 30, 2004 at 10:50 AM / IP Logged

Where are you reading this +12v .75 sec pulse on blue/green trigger wires ?

Crimestoppers come by default with negative pulses on the blue/green wire. It comes with a third red wire along with the blue and green wire which carries 12v to power a relay so you can convert the negative pulses to positive as needed.. Look at the attached diagram..

CS 2011RS IV Lock problem -- posted image.

metaverse

Copper - Posts: 210

Joined: June 13, 2002

Location: United States

Posted: November 30, 2004 at 11:05 AM / IP Logged

Never mind. I read the updated rev B manual for RS-2011 IV unit. you should indeed get a 12v pulse on the blue for lock and/or negative pulse on the same wire for unlock. If it does not work, looks like the alarm brain took a wrong turn somewhere. Call up crimestopper support. see if there is a jumper or dipswitch that is a hidden setting that might reset..they'll replace the unit for you if needed. I would try one simple thing..a whole system reset... Try it and post back with results..

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

CS 2011RS IV Lock problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.