window relays

Ok heys what i want to do. I want to roll my windows up and down with my remote I am going to use 2 chs on my alarm to do so.    I have 4 windows and i want them all to do the sme thing. I figured out how i was going to make the relays work but what can i use to shut the relay off after the window closes. The windows will be on a timer but  i can only set the timer in 10 sec intervals. so the windows will still try to roll up even thought they are already rolled up untill the timer quits. and evently this would probably tear up something...... thanks chris

break down  and buy a window mod you can get one for $20 or so on ebay

and if you know anyone at a shop you can do the same how many windows if you want four windows youwill need two dei 530t window mods one for up and down in front and one up and down for back.Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

I agree, buy 2 4window roll up module. Relays were used back in the days and are just so confusing sometimes. It'll be messy and hard to find a place for all those relays.

all right thanks guys, i didnt know that they made a module that did up and down for two windows. i thought that i was going to have to buy 4 of the oneway modules for 2 windows.

ok got another ?, can I wire all for window to one 2 window up/down module by adding a relay or something.

It can be done but you would need a handfull of relays to do it and maybe a timer/latch module if you are only using two channels. You are better of with 2 window modules like DEI's 530T which will give you one touch up/down for all four windows and window crack using one channel.Karl

Pacific Accessory Corporation

Mobile Audio Interfacing Equipment

Connecting You to Your Music Since 1976