Install of prostart remot starter ct3300

Home / the12volt's Install Bay / Car Security and Convenience / Install of prostart remot starter ct3300 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mrocca100

Member - Posts: 1

Joined: December 11, 2004

Posted: December 11, 2004 at 6:36 PM / IP Logged

Hi I just bought a ct3300 car starter (PRO START) I was wondering if I need any relays or anything else extra. All I bought is the retail box from Canadian Tire. If there is anything else I need to install this starter can you please advise. Oh I have a 1995 Grand AM. Automatic trany. Power windows and power trunk. No OEM alarm system. I read the manual inside and out and the only thing I can find on relays is for the anti theft starter kill. relay 34-0734-4. Any info would be great.

lspker

Silver - Posts: 503

Joined: November 23, 2003

Location: Canada

Posted: December 11, 2004 at 9:13 PM / IP Logged

You will need relays for power door locks, trunk release and you may need one for extra ignition if on the car.

Daisley

Member - Posts: 6

Joined: December 08, 2004

Location: Canada

Posted: December 11, 2004 at 9:18 PM / IP Logged

I just finished an install of the CT3300, I found the photos, etc on the www.Prostart.org website very helpful. You need to provide the serial number from your receiver, and the year / make of car. It provided me with complete breakdown of wire colors, relays needed, photos of where to connect, etc.

The downside is the total lack of technical support, or how to get help from them. And Canadian Tire can't offer any useful advice about installations.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Install of prostart remot starter ct3300

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.