pro start r/s

Home / the12volt's Install Bay / Car Security and Convenience / pro start r/s (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

muaiad97

Copper - Posts: 207

Joined: April 08, 2003

Location: Canada

Posted: December 23, 2004 at 5:08 PM / IP Logged

HI ALL

I GOT STUCK WITH THIS KIND OF R\S AND I WILL RECOMMAND THAT NO ONE BUY THIS KIND BECAUS WHEN U LOOK AT THE MANUAL INSTALATION IT LOOK VERY EASY BUT WHEN I INSTALLD IT I SPEND ALL DAY TO PROGRAM THE UNIT TO TRANSMETER I COULDNT I CONECTED ALL WIRES CORRECT AND I FOLOWED THE INSTRUCTION HOW TO PROGRAM THE TRANSMETER TO THE UNIT DIDNT WORK SO I TOOK OUT EVWRY THING AND I RECONECTED AGAIN I HAD THE SAME PROBLEM . ANYYYYYYYY HELP PLEEEES PRO START CTC 5000 WITH ALARM THE CAR IS DODGE INTREPID 97

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: December 23, 2004 at 6:02 PM / IP Logged

i hate this brand for exactly this reason... the programming sucks... you have to be very precise in the counting sequence.... when it says hold the pin switch down for 4 seconds... it means exactly 4 seconds... etc, etc....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

muaiad97

Copper - Posts: 207

Joined: April 08, 2003

Location: Canada

Posted: December 23, 2004 at 9:43 PM / IP Logged

I KNOW I HATE IT TOO BUT I HAVE TO MAKE IT WORK BECAUSE THE STOR WHERE I BOUGHT IT FROM NOT TAKIN IT BACK BECAUSE I USED IT SO IT COAST ME $180 .

lspker

Silver - Posts: 503

Joined: November 23, 2003

Location: Canada

Posted: December 23, 2004 at 10:09 PM / IP Logged

We've put these in before, very rarley did the transmitters not program up. When you plugged in the brain, did the siren go off?, and was the ant plugged in the right hole. If the siren was quite then the unit was in valet mode. You need to take it out of this mode first, then program the transmitters. We program the transmitters on the bench before starting the install, makes things easier later.

muaiad97

Copper - Posts: 207

Joined: April 08, 2003

Location: Canada

Posted: December 23, 2004 at 10:15 PM / IP Logged

ok then i am waiting for u to tell me how u program it befor the installation that will be easier as u said.

muaiad97

Copper - Posts: 207

Joined: April 08, 2003

Location: Canada

Posted: December 23, 2004 at 10:16 PM / IP Logged

muaiad97 wrote:

HI ALL

I GOT STUCK WITH THIS KIND OF R\S AND I WILL RECOMMAND THAT NO ONE BUY THIS KIND BECAUS WHEN U LOOK AT THE MANUAL INSTALATION IT LOOK VERY EASY BUT WHEN I INSTALLD IT I SPEND ALL DAY TO PROGRAM THE UNIT TO TRANSMETER I COULDNT I CONECTED ALL WIRES CORRECT AND I FOLOWED THE INSTRUCTION HOW TO PROGRAM THE TRANSMETER TO THE UNIT DIDNT WORK SO I TOOK OUT EVeRY THING AND I RECONECTED AGAIN I HAD THE SAME PROBLEM . ANYYYYYYYY HELP PLEEEES PRO START CTC 5000 WITH ALARM THE CAR IS DODGE INTREPID 97

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pro start r/s

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.