Remote Start help

Home / the12volt's Install Bay / Car Security and Convenience / Remote Start help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

youknownb

Member - Posts: 6

Joined: October 17, 2002

Location: United States

Posted: October 17, 2002 at 9:46 PM / IP Logged

I am trying to install a viper 500esp in my 2002 celica with a manual transmission. I know how to make a safety switch to make sure that the car is in neutral and that it will only start with the ebrake on also but what i don't know is why the remote start isn't working. I left the safety precautions un hooked and just tried to start the car in neutral but the lights blinked and the airbag light came on then went off when i disconnected the remote starter relay. Can anyone help me with this problem.

Thanks Nick

Sound Pressure

Silver - Posts: 711

Joined: March 09, 2002

Location: United States

Posted: October 17, 2002 at 10:38 PM / IP Logged

Check the options that you did not connect. Some require that it see ground in order for the remote start to engage. In your manual for the 500esp it will tell you under each wire if it needs to see ground or not. Hope this helps. Post your results.

Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 18, 2002 at 5:29 AM / IP Logged

make sure all doors and hood are closed
make sure that the tach is good
make sure that the unit is programmed properly

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Madrunner

Member - Posts: 1

Joined: October 18, 2002

Location: United States

Posted: October 18, 2002 at 11:22 AM / IP Logged

How did you make a switch so that you cant' autostart without ebrake on and out of gear? I am trying to do the same thing for a Toyota Tacoma. If anyone has suggestions on how to do so Please let me know here or email me at mario_thames@yahoo.com.

Ohmz

Copper - Posts: 193

Joined: May 09, 2002

Location: United States

Posted: October 18, 2002 at 12:54 PM / IP Logged

make sure you didn't hook up the starter wire before the starter kill relay. Make sure you have the correct ignitions. Toyotas carry 2 ignition wires

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote Start help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.