Help for Remote Start on 99 Ram

Installed DEI Valet 562T in 2003Nissan Altima.  RS starts car then it immediatly dies.  It still starts and dies with key in ignition and OFF.  RS starts car with key in ignition and ON. 

I have the relay wire connected as follows:

Purple  to starter side of cut RED / Black starter wire

Green to Key side of cut RED / Black starter wire

Both Red wires connected to Green wire from ignition

Orange connected to Red wire from ingnition

Pink/White connected to WHITE/ Blue wire from ignition

Pink connected to uncut BLACK/ Red from ignition. 

8617 Relay Brown connected to BLACK / YELLOW from ignition

8617 Relay Yellow connected to Green wire from ignition (constant +12v)

8617 Relay Red connected to Green wire from ignition (constant +12v)

8617 Relay Black connected to Purple (-) 200mA Remote start Aulillory 4 pin harness

Shutdown diagnostics shows six flashes (+/-) Shutdown

The Tach has been learned and indicates a solid status light.  A dmm on the tach lead shows approx 2VAC on the tach input at RS

Please Help!!

Car:  1999 Dodge Ram 1/2 ton Sport

I have verified that everything is hooded up to what it should be and tested it with a meter.  I tried adding the Ignition 2 output, but it did nothing.

The remote works for the unlock/lock (you can here the relays going off) and the red led flashes with the locked (armed) function.

Here is how we have things hooked up:

Red Wire:  12/12/12 to Red Wire(2)/+12 Battery Input