White/Blue Remote Start activation input

Home / the12volt's Install Bay / Car Security and Convenience / White/Blue Remote Start activation input (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Brianshaw

Member - Posts: 5

Joined: December 14, 2004

Location: United States

Posted: January 02, 2005 at 3:43 PM / IP Logged

02 Jeep liberty viper 791vx

I have no clue where this wire should go and the instrutions only say that

"This input comes from the factory set to 2 activation pulses. This means that is is nessissary to have 2 consecutive ground pulses on the white blue wire for the remote start to activate or deactivate. The same holds true for the remote control activation when set to a two pulse setting it is nessissary to press the * button twice for the remote start to activate oe deavtivate.

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: January 02, 2005 at 4:52 PM / IP Logged

You dotn need to have that wire hook up, waht you can do it wire a button switch to it, and if you push it 2 times or waht ever it set at the car will start. It can be used say you go to a store and want to kept the car runnign push the button 2 tiem sand the RS will be on sao u can take your keys with ya, you can still do that just use the remote as the car is running.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

White/Blue Remote Start activation input

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.