2001 grand caravan
Welcome Guest :)
daveandcc
Member -
Posts: 1
Joined: January 02, 2005
Location: Cayman Islands
Posted: January 02, 2005 at 8:49 PM / IP Logged
im putting in a remote starter looking for wiring diagran and how to bypass factory pass key sh*t can anyone help dash i apart and waiting lol 2001 dodge grand caravan with pass key thanks in advance
Craig3708
Copper -
Posts: 155
Joined: January 30, 2004
Location: Canada
Posted: January 02, 2005 at 9:00 PM / IP Logged
Remote Starter Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Start: | | YELLOW (NOTES BELOW | IGNITION SWITCH HARNESS** |
Ignition #1: | | PINK/WHITE | IGNITION SWITCH HARNESS* |
Ignition #2: | | N/A | |
Ignition #3: | | N/A | |
Accessory: | | N/A | |
Brake Light: | | WHITE/ TAN | IGNITION SWITCH HARNESS* |
Tach Signal: | | PURPLE / ORANGE (AC) | GRAY CONNECTOR BY IGNITION MODULE |
Parking Lights: | | WHITE/ BROWN (-) | AT HEADLIGHT SWITCH*** |
Headlights: | | N/A | |
Diesel Glow Plug: | | N/A | |
Clutch Bypass Wire: | | N/A | |
Notes: | | * Many Of These Vehicles Are Equipped With A Transponder (Even If The Key Is Black). Use Universal Alarm Bypass Module Part Numner 2x402 Where X Can Be Any Number. ** NOTE!!! A Second Start Wire (PURPLE / Brown) Needs a relay installed to provide a ground (-) through a 180 Ohm Resistor during crank in order to remote start the vehicle, See Installation Note #162. ***The parking lights are negative trigger through a 2.1K ohm resistor. ****All DesignTech remote starters except the 2xx22 have an ignition 3 output - it is the WHITE/ black in the 'control harness'. This wire will be used to control the bypass module, if needed. |
Alarm and Keyless Entry Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Constant +12 Volts: | | RED | IGNITION SWITCH HARNESS (MAX #AMPS) |
OEM Alarm Disarm: | | VIOLET/LT. BLUE | AT PLUG AT PCM ON FIREWALL DRIVER'S SIDE****** |
Dome Lights/Superv: | | BLACK/ WHITE (-) | AT 4 PIN PLUG NEAR FUSE PANEL |
OEM Horn: | | GREEN/ PURPLE (-) | STEERING COLUMN HARNESS |
Power Lock: | | PURPLE / GREEN | AT PLUG AT PCM ON FIREWALL ***** |
Power Unlock: | | Single wire system | AT PLUG AT PCM ON FIREWALL ***** |
Trunk Release: | | VIOLET/TAN | AT PLUG AT PCM ON FIREWALL DRIVER'S SIDE ****** |
Alarm Input Wire: | | BLACK/ WHITE (-) | AT 4 PIN PLUG NEAR FUSE PANEL |
Notes: | | *****for the 2001-02 Caravan Lock is negative trigger through a 5.3k ohm resistor. Unlock is negative trigger through a 2.0k ohm resistor. For the 2003 Caravan Lock is negative trigger through a 2.2k ohm resistor. Unlock is negative trigger through a 390 ohm resistor. The Body Control Module (BCM) is in the driver kick panel near the the parking brake, ******See Installation Note #211. A Single Pulse Of Ground Through A 2.2 K-Ohm Resistor Will Open The Liftgate. POWER SLIDING DOORS: Violet/Dk. Blue Wire At Switch. Driver's Side - A Single Pulse Of Ground Through A 2.7 K-Ohm Resistor. Passenger's Side - A Single Pulse Of Ground Through A 1.5 K-Ohm Resistor. ****** To disarm the OEM alarm a negative trigger through a 9.20k ohm resistor. |
http://www.designtech-intl.com/Content/techsupport/documents/section04/note144.pdf This is a link to making your own bypass module, but I would recommend buying one if you have never made one before.
Craig...
Follow the12volt.com
Wednesday, August 27, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
Topic Closed)
Members
Search
Register
Login
Printable version
