2003 Tiburon remote start

It looks like if you set your unlock pulse for a 2.8 second duration then branch off the unlock wire so it powers up the Acc, Ign and the bypass module, and it looks like the key sense wire too. You need to energize the Ign wire witha relay, the Acc wire with a relay and then if you do not have an onboard unlock relay you could use a single relay to send a ground pulse to the unlock wire, the keysense wire, and the (-) when running input on the bypass module. You need to diode isolate these wires though. Email me (don't PM me)if you have any questions. J Rilla

Owner/Installer