the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2003 Honda Odyssey driver door module


Post ReplyPost New Topic
< Prev Topic Next Topic >
olivtech 
Member - Posts: 2
Member spacespace
Joined: January 11, 2005
Location: United States
Posted: January 11, 2005 at 8:40 PM / IP Logged  
Hello, I need to disarm the OEM alarm on a 2003 Honday Odyssey EX. I understand that the wire that I need to find is suppose to be blue (-) and is located in the driver door module. The problem is I dunnot know how to access this module. I unscrewed the window control panel on the driver door to check if I can see/access the driver door module but I only saw a black box that is not accessible from the window control panel. Can someone indicate the steps in order to properly access the driver door module, what I need to unscrew from the door and which panels I have to remove from the driver's door and how (the proper steps to access the module and to run a wire through the door to the driver kick panel).
Also I am wondering if I really need to put apart the driver door or if I can find the wires on the driver kick panel where the door wires come (I have not found any blue wire out of the driver kick panel from door wires).
Thanks for any help.
Oliv
JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: January 11, 2005 at 8:51 PM / IP Logged  
The drivers door module is actually the drivers window switch.
olivtech 
Member - Posts: 2
Member spacespace
Joined: January 11, 2005
Location: United States
Posted: January 11, 2005 at 9:32 PM / IP Logged  
Tks JWorm this is a very useful information :)
Now I just checked and in my car the blue wire is not the disarm oem alarm. I have identified the disarm oem alarm wire which is the BLACK/ red wire and seats just next to the blue one. I think it is a useful information for any 2003 Honda Odyssey owner (I have the 2003 EX-L nav).
Ok so now I just need to put a wire in the middle of the wires and push it till it appears in the driver kick panel, right? (I guess there are no other easier way)

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, July 17, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer