96 Dodge intrepid unlock/lock wires

Home / the12volt's Install Bay / Car Security and Convenience / 96 Dodge intrepid unlock/lock wires (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

MinusZero

Member - Posts: 9

Joined: January 11, 2005

Location: United States

Posted: January 12, 2005 at 12:09 AM / IP Logged

Does anyone know what colors the unlock/ lock wires are?

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: January 12, 2005 at 2:48 AM / IP Logged

Its a one wire system. The wire is in the drivers kick, it's ORANGE / purple POS(+) pulse

Lock= 2.7kohms unlock=620ohms USE RELAYS

Also.....the factory alarm dis-arm wire is in the same location NEG(-) pulse, it's lt.GREEN/ orange

MinusZero

Member - Posts: 9

Joined: January 11, 2005

Location: United States

Posted: January 12, 2005 at 2:56 AM / IP Logged

it doesnt have a factory alarm, but im installing an omega rec-11 which the outputs are a negative pulse ????/ help newbie at the wheel

mobileworks

Copper - Posts: 136

Joined: December 16, 2004

Location: United States

Posted: January 12, 2005 at 7:19 AM / IP Logged

http://www.mobileworksaudio.com/guides/intrepid93radio.htm

Does your dash look like the one in the picture above...?

If so then your door lock wires can be found in the fuse box to the left side of the dash. Remove the fuse access panel you will see three relays towards the front of the car. The two top relays are lock and unlock....you can look at the back of the fuse panel to see which one is lock and unlock...

pull the relays straight out of the fuse panel. You will see 5 pins..

*| | |

The relay socket will look like this, slide your wire from your omega into the bottom far left pin. the pins on the bottom row are small and the two top pins are large.

Relays are setup for negative trigger already.

misterjimbo

Silver - Posts: 535

Joined: October 11, 2003

Location: Michigan, United States

Posted: January 12, 2005 at 7:44 AM / IP Logged

also if you do not trust mobileworks you can stick your meter in the socket after you pull out the relay and press lock and unlock buttons to make sure you are on the correct pin of the relay. it never hurts to double check. i just did one two days ago and mobile works pin location is correct.... measure twice cut once though right?

MinusZero

Member - Posts: 9

Joined: January 11, 2005

Location: United States

Posted: January 12, 2005 at 9:55 AM / IP Logged

Cool I'll try that today

MinusZero

Member - Posts: 9

Joined: January 11, 2005

Location: United States

Posted: January 12, 2005 at 3:12 PM / IP Logged

got working thanks guys for your help

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

96 Dodge intrepid unlock/lock wires

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.