Clifford G4 with Intellistart In mitsu

Home / the12volt's Install Bay / Car Security and Convenience / Clifford G4 with Intellistart In mitsu (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Nchand247

Member - Posts: 1

Joined: July 04, 2004

Location: United States

Posted: January 15, 2005 at 11:44 PM / IP Logged

The remote start works fine yet the overrev protect often shuts the car down in the mornings.. I have the clifford wizard software but nothing on how to change that. I believe the remote start cant be done in tachless mode and has to have a tach input. Its a clifford arrow 3 with a g4 intellistart add on..

the car is a 02 mistu lancer.. when remote started.. the car starts (after 2 attemps usually) and then when it does start it revs high and shuts down!

anyone know a fix for this problem?

thanks

nchand247

OmarR

Copper - Posts: 162

Joined: April 02, 2003

Location: Indiana, United States

Posted: January 16, 2005 at 5:10 PM / IP Logged

Program the tach at a higher RPM

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford G4 with Intellistart In mitsu

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.