viper 790xv alarm

Home / the12volt's Install Bay / Car Security and Convenience / viper 790xv alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Copper - Posts: 137

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 16, 2004

Location: United States

Posted: January 24, 2005 at 2:24 AM / IP Logged

Just wondering, my alarm has no input wiring for my remote start harness, this should have came with the alarm right, or do I have to buy the harness seperately? I want to have seperate inputs for my merc switches rather than running both dioded to my trunk input. I need to see if I need to go to the installers and get what's rightfully mine.

Thanks

gus1

Gold - Posts: 1,013

Joined: October 15, 2003

Location: Canada

Posted: January 24, 2005 at 9:40 AM / IP Logged

Soooo..... do you have a 690Xv or a 791Xv? I am confused as to which harness you are talking about. The satellite relay harness? The XCRS itself? The tach/brake/hood/neut. safety/2nd status harness?

Gus

Wherever I go, that is where I end up......

Copper - Posts: 137

Joined: September 16, 2004

Location: United States

Posted: January 24, 2005 at 2:56 PM / IP Logged

As the topic says it is a viper 790 XV alarm, and I am referring to the remote start harness 6 pin H3 harness which includes the hood sensor input. Do you know anything about the 790XV's?

Jschult3

Copper - Posts: 106

Joined: December 25, 2004

Location: United States

Posted: January 24, 2005 at 4:27 PM / IP Logged

The 790 does not have the new mini relay as the 791xv does.If you bought it new, Yes, it should have had all the harness's that are required. You need the hood sensor input for the RS to work. Is this a manual car? They may not have included the missing items because of that?

I'd definetly go back and ask them where the other parts are.

Good Luck

Jeff

Always Verify Wire information before Connecting! Just a Darn Good DIY'R

Copper - Posts: 137

Joined: September 16, 2004

Location: United States

Posted: January 25, 2005 at 2:07 AM / IP Logged

cool thanks for answering my question, I went back and they gave me what I thought was it, grey wire, brown wire etc..., but only had 5 pin, I did not even check to see if was 6, so now I gotta go back again, these guys really suck!

gus1

Gold - Posts: 1,013

Joined: October 15, 2003

Location: Canada

Posted: January 25, 2005 at 10:04 AM / IP Logged

790 will need the 6pin.... status, hood, brake, neut. safety, tach, and second status.

I have actually hit a couple units that were missing a harness. No biggie, that's what the "parts" boxes are for. And, yes... I know the 790 quite well.

Gus

Wherever I go, that is where I end up......

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 790xv alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.