hellfire alarm

I have a hellfire alarm. However, I have no manual! Maybe someone can help! The wires are in the following order (left to right): White(fused), Red(fused), brown, black, orange, grey, green, blue, violet, yellow. All I really need to know is where the door trigger outputs are. Also a motionsenson came with the alarm. It is made by spider automotive electronics inc. It is model MD1. It has a red and brown wire. Where do these go. I know this is a lot, but any help would be great. I tried visiting harrison-hellfire.com, but i couldn't find any help.

thanks,

dyer

Most Possible

white fused = flashing lights

red fused = positive constant

brown = +siren output

black = - negative

orange = - starter cut relay output

gray = ?? possible 2nd channel output

green = - door trigger

blue = - trunk / hood trigger

violet = + door trigger

yellow= + switched ignition

Good Luck   These are the most possbile outcomes.