2004 jeep liberty alarm install

Home / the12volt's Install Bay / Car Security and Convenience / 2004 jeep liberty alarm install (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

derfnigel

Member - Posts: 2

Joined: February 26, 2005

Location: Canada

Posted: February 26, 2005 at 11:33 AM / IP Logged

Im installing a viper 690xv in a 2004 jeep liberty.Im having problems with parking lights i know iv got to use a relay and a resistor some say a 1000 ohm others say a 910 ohm with 5 % tolerance.I was thinking of useing a standard polarity inverting wireing for the relay https://www.the12volt.com/relays/page1.asp. Can anyone help?

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: February 26, 2005 at 11:42 AM / IP Logged

The diagram I see says a 900 ohm resistor. Another says 910 like you said. If you have a positive output only for parking lights on your viper than just use the relay diagram to convert to negative like you are thinking of doing. Sounds like you're on the right track.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 jeep liberty alarm install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.