Moved Antenna - Alarm LED is Solid

Home / the12volt's Install Bay / Car Security and Convenience / Moved Antenna - Alarm LED is Solid (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Mbinc

Member - Posts: 2

Joined: March 21, 2005

Location: United States

Posted: March 21, 2005 at 2:05 PM / IP Logged

Car: Honda Civic 2003

Alarm: Python 1600XP

Yesterday I relocated my antenna to above the rear view miror because my range wasn't very good. I unplugged it, ran the wire through the pillar plugged it back in and i'm getting much better range. The problem i'm running into is my status LED is staying solid when the key isn't in the ignition. When I arm/unarm the siren doesn't beep (when it used to), but the parking lights flash. I don't think the alarm is arming because i've armed the alarm, and unlocked the door using my key and the alarm doesn't go off. Any ideas on what I might have done to cause this?

Mbinc

Member - Posts: 2

Joined: March 21, 2005

Location: United States

Posted: March 21, 2005 at 3:00 PM / IP Logged

oh i'm stupid it was in valet mode. i was soooo paranoid that i messsed up something. thanks! tho

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Moved Antenna - Alarm LED is Solid

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.