the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

starter problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
sedg06 
Member - Posts: 9
Member spacespace
Joined: November 28, 2004
Posted: May 07, 2005 at 10:27 PM / IP Logged  
i have a viper 791 hooked up into my 98 eclipse GSX, i did it myself, but the problem is, the starter starts, then dies within 1-2 seconds. whats going on?
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: May 08, 2005 at 1:56 AM / IP Logged  
Where did you get the unit?
dare_ds69 
Silver - Posts: 419
Silver spacespace
Joined: January 25, 2005
Location: New Jersey, United States
Posted: May 08, 2005 at 11:57 AM / IP Logged  
did you conect the tach, if not you have to program to tachless mode, if you did tach you have to program to and make sure to start with ( * ) don't use lock and unlock thas turbo timer
how own your mind, control your life.
MECP certified. always use a DMM
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: May 08, 2005 at 12:02 PM / IP Logged  
So your saying that the starter engages and the car runs but only for a couple of seconds or the starter starts for a couple of seconds ? Make sure that you do not have feedback on the brake wire and also test your ground to ensure a proper, solid ground. I have seen systems where everything was wired properly but no start and I checked the ground and that was the problem.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
sedg06 
Member - Posts: 9
Member spacespace
Joined: November 28, 2004
Posted: May 08, 2005 at 3:43 PM / IP Logged  
starter problem -- posted image. just had to adjust the crank time...

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer