01 windstar

Home / the12volt's Install Bay / Car Security and Convenience / 01 windstar (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jcarr

Member - Posts: 3

Joined: November 23, 2002

Location: United States

Posted: November 30, 2002 at 5:01 PM / IP Logged

i'm in the process of installing a commando rs combo and i'm confused about the wiring for the park lights and also the remote start connection everything else seems to be going along fine

if you could help i would be very grateful 01 windstar -- posted image.

trusdamanr

Copper - Posts: 116

Joined: May 15, 2002

Location: United States

Posted: November 30, 2002 at 5:28 PM / IP Logged

http://www.bulldogsecurity.com/wires2/wiringimages/WINDSTAR%20PARKING%20LIGHTS.gif hope this helps!!!

jcarr

Member - Posts: 3

Joined: November 23, 2002

Location: United States

Posted: November 30, 2002 at 6:13 PM / IP Logged

thanks,i tried that .my question is the "brown"wire

is that the wire from the remote module?

also the remote is able to program features it says push the proogram swith

is that one of the buttons on the remote or is it the valte switch?

futher checking on my part the br/wht wite is the off position.shouldn't it have power fed to the30 an 87 pin

trusdamanr

Copper - Posts: 116

Joined: May 15, 2002

Location: United States

Posted: November 30, 2002 at 9:06 PM / IP Logged

thats correct the brown on pin 85 is the wire that goes to your parking light ouput. the relay when activated will ground out the BLACK/ green wire when its not energized the BROWN / white wire completes a circuit....also make sure you dont have the auto lights on..and the program switch im not really sure im not familar with those types of remote start... any other i would say the valet switch is the program switch.... but also some bulldog remote starts are programed through the remotes. so not really sure

jcarr

Member - Posts: 3

Joined: November 23, 2002

Location: United States

Posted: November 30, 2002 at 9:58 PM / IP Logged

thanks for the info

had to give up for the evening due to the late hour

hopefully i can continue in the am i will reply back once i complete it thanks.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

01 windstar

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.