Trailblazer Remote Starts

Home / the12volt's Install Bay / Car Security and Convenience / Trailblazer Remote Starts (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

offroadzj

Gold - Posts: 2,043

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: June 03, 2005

Location: New York, United States

Posted: October 07, 2005 at 6:40 PM / IP Logged

I was going to bring back my old topic from the past, but it had already been locked. Im in the install bay now, and we started carrying DEI, but for some reason the computers in Trailblazers don't want to seem to "get along" with the remote starts. Apparently it is just something to do with the factory computer. Is there anything special that needs to be done with teh exception of the 457GW(455G) for the locks, and the 556LW(555L)? We really would like to be able to start doing these because we have turned 2 away already this "season". Plus the fact that if I can get some help from you guys and bring the solution to the bay, I'll look like the hero... lol.

Thanks again guys.

kenny

Circuit City #3160

cntrylvr79

Silver - Posts: 582

Joined: July 02, 2005

Location: United States

Posted: October 07, 2005 at 7:34 PM / IP Logged

We haven't really had any problems with these things short of a couple 555l's not learning the resistance code. Just make sure you got everything hooked up right and make sure to start the vehicle with the key at least once before you try to remote start it. I know the last sstatement may seem stupid but I've seen installers try it.

Cause I'm So white and nerdy...

First Class Certi-fried installer

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 07, 2005 at 8:03 PM / IP Logged

OMEGA is the way to go...........

GM Passkey 3 & Passlock 2 Override Interface (DB-PASS-23A)


GM Doorlock Alarm & Transponder/Passlock Interface (DB-GMDLBP)


Multi Vehicle Databus Doorlock Alarm Interface (DB-DLMT)


GM Passlock 1 & 2 & VATS & Saturn Ion Self Learning (IB-PLXR)

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 07, 2005 at 8:08 PM / IP Logged

I use the Trilogix modules for all the late model GM's and have no problems with any of the Trailblazer's or any Ion based vehicles. Your description of your problem is vague to say the least. What exactly is the problem when you say " the computers in Trailblazers don't want to seem to "get along" with the remote starts " ? Are you experiencing no starts, over cranks or cranks but no start problems ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: October 07, 2005 at 8:15 PM / IP Logged

He's not talkin' Canadian Models...... Trailblazer Remote Starts -- posted image.

Don't Learn from Others Mistakes

You Might Be the One That Knows.

mxxmikexx

Silver - Posts: 796

Joined: September 18, 2002

Location: United States

Posted: October 07, 2005 at 8:20 PM / IP Logged

ive always used the DEI interfaces and have never had one problem, these are cake walk vehicles to install in. when you say the the vehicle isnt "getting along" with the remote start , what exactly do you mean by that?

Mike Battaglia

Specialized Car Audio

Bensenville IL 60106

offroadzj

Gold - Posts: 2,043

Joined: June 03, 2005

Location: New York, United States

Posted: October 07, 2005 at 10:55 PM / IP Logged

the remote start just doesnt start... it doesnt crank, and then it will even mess with the ignition itself. I have personally never done it, Im just going by what the other installers have said. The 3-4 that we have tried have all done the same thing, and it wasnt the same installer. I would like to be able to do them again so we dont have to turn anyone away. I'll have to check with one of hte guys to see exactly what it does/doesnt do.

kenny

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

mxxmikexx

Silver - Posts: 796

Joined: September 18, 2002

Location: United States

Posted: October 07, 2005 at 10:58 PM / IP Logged

well, someone is doing something majorly wrong, that vehicle really isnt any different than any other gm vehicle

Mike Battaglia

Specialized Car Audio

Bensenville IL 60106

offroadzj

Gold - Posts: 2,043

Joined: June 03, 2005

Location: New York, United States

Posted: October 08, 2005 at 2:12 AM / IP Logged

i think that it might have been the bypasses. We havent been able to get the new dei bypasses, so we were stuck with some other ones. I dont know if they have done it since getting the DEI bypasses, so we'll just have to give it a try and see what happens.

Thanks for the help.

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

kgerry

Platinum - Posts: 3,455

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: October 08, 2005 at 10:56 AM / IP Logged

i've done probably 50+ with no issues... both with the 455G & 555L combo and with the 457G...... i'd look at installer error....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.