LED stays on

Home / the12volt's Install Bay / Car Security and Convenience / LED stays on (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

msascarbrough

Member - Posts: 2

Joined: October 19, 2005

Location: United States

Posted: October 19, 2005 at 7:18 AM / IP Logged

My led on my aps590 will not go off once the vehicle is cranked. It will reset the flashes but stays on constant. Does anyone have any clues?

Mike

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: October 19, 2005 at 8:33 AM / IP Logged

You have enter Valet Mode.

Switch the key on to ignition.

Press the and release the valet switch three times, then you should be out of valet mode.

If not, refer to your owners manual for the correct procedure to get out of valet mode.

Be careful whose advice you buy, but be patient with those who supply it. LED stays on -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

LED stays on

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.