the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

nitro bmw 2-way alarm install


Post ReplyPost New Topic
< Prev Topic Next Topic >
chrisati 
Member - Posts: 8
Member spacespace
Joined: January 18, 2005
Location: United States
Posted: October 23, 2005 at 1:49 AM / IP Logged  
I just bought a nitro bmw 2-way LCD Paging & Remote start car alarm and i need some help. In the wiring diagram included with kit it says something about hooking up a air conditioner wire and a keyhole on wire?? well im pretty sure the keyhole on wire shows + with key in on position but what about the a/c wire? Has anyone every installed one of these alarms??? 
CsC
chriswallace187 
Gold - Posts: 1,661
Gold spacespace
Joined: March 11, 2002
Location: Pennsylvania, United States
Posted: October 23, 2005 at 5:27 AM / IP Logged  
What's the make and model of this alarm, where'd you get it from, and what type of vehicle is it going into?
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two
chrisati 
Member - Posts: 8
Member spacespace
Joined: January 18, 2005
Location: United States
Posted: October 24, 2005 at 12:47 AM / IP Logged  

I guess its made by Nitro and the make is BMW-2-WAY. On the users manual it says ISO9001 at the bottom left corner.  Its a 2-way FM car alarm with LCD status display.  I bought it off E-bay, its called sonicelectrnix.com.  Its going in an 03' Civic LX.  I already installed an alarm in it with the same options as the one I want to put in, but the LCD remote started messing up.

CsC
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 24, 2005 at 8:58 AM / IP Logged  

chrisati wrote:
I just bought a nitro bmw 2-way LCD Paging & Remote start car alarm and i need some help. In the wiring diagram included with kit it says something about hooking up a air conditioner wire and a keyhole on wire?? well im pretty sure the keyhole on wire shows + with key in on position but what about the a/c wire? Has anyone every installed one of these alarms??? 

The A/C wire will be your ACCESSORY wire for the Honda ( BLACK/ RED ) and then you also have a 2nd ACC wire ( WHITE/ RED ) that you will need to power up. If you don't have a designate 2nd ACC wire then you will need this diagram: http://www.velocitymotorsport.com/images/install_notes/2nd_accessory_relay.jpg

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
chrisati 
Member - Posts: 8
Member spacespace
Joined: January 18, 2005
Location: United States
Posted: October 24, 2005 at 5:35 PM / IP Logged  
well the a/c wire I was refering to is the air conditioner wire.  By the looks of it, it seems that both the air conditioner wire and keyhole on wire are pretty much the same wire so it might just be an accesory wire. I know that sounds weird but thats what it says in the installation manual.  i have pics of the alarm itself if anyone would like to see it or you can go to sonicelectrnix.com and look at it.
CsC
sneakycyber 
Silver - Posts: 413
Silver spacespace
Joined: September 13, 2005
Location: United States
Posted: October 25, 2005 at 12:30 PM / IP Logged  
The airconditioning wire they are referring to is a second Accessory wire just like velocity said (Black  with red ).. It just means if you dont hook up this wire the a/c system wont work. So you need both accessory wires (black with red and White with red) connected for the unit to work properly. The keyhole wire they stated is the Ignition 1 wire ( I am assuming ) this wire will test positive in the run and crank and off in the accessory position. Hope this helps.
chrisati 
Member - Posts: 8
Member spacespace
Joined: January 18, 2005
Location: United States
Posted: October 25, 2005 at 2:05 PM / IP Logged  
Well thats what I figured it would be, but in the manual and on the harness the wires are both green and are the same wire. So now what?
CsC

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, July 5, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer