Nissan Sentra, 516U Voice Module, Innosys Echo 2-Way Alarm

Home / the12volt's Install Bay / Car Security and Convenience / Nissan Sentra, 516U Voice Module, Innosys Echo 2-Way Alarm

Welcome Guest :)

Members

< Prev Topic Next Topic >

remas76

Member - Posts: 2

Joined: February 07, 2005

Location: Singapore

Posted: October 31, 2005 at 7:00 AM / IP Logged

Below is the wiring for Innosys Echo 2 way alarm.. Have manage to connect the 516U Voice module to the alarm, And able to "Viper Arm" and "Viper Disarm". But for the green (-) Warnaway trigger input. Which cable should I connect it to so as to give "Viper protected, please stand clear" when the system detect shock.. My shock sensor is bulit in to the alarm system.

Yellow-Starter

Black-Gnd

Blue-Ignition 1

Violet-Starter Kill

White-Ignition 2

Red-12V+ Power

Orange-Trunk Release

Brown-Siren

Green-Door Lock

Blue-Door Unlock

Yellow-Park Lights

Pink-Ground Out When Run

Gray-Brake Pedal

Sky Blue-Generater Input

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.