prostart 3400 car starter

Home / the12volt's Install Bay / Car Security and Convenience / prostart 3400 car starter (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

start

Member - Posts: 4

Joined: January 01, 2006

Location: Canada

Posted: January 01, 2006 at 4:26 PM / IP Logged

i just installed a prostart ct3400tw into my 1999 dodge dakota and can't get it to program the remote if anyone can help it would be a big help what is going on is when i flash the hood pin the parking lights just flash once not stay on like they should?

muaiad97

Copper - Posts: 207

Joined: April 08, 2003

Location: Canada

Posted: January 01, 2006 at 5:10 PM / IP Logged

hold down the hood pin for 3 second then relese it the parking light wil flash as soon as u relese the hood pin push it and rdlese it again then u turn the ignition on then off then u hold the lock botten on remot should de work.

maxcat

Copper - Posts: 211

Joined: June 26, 2005

Location: Canada

Posted: January 01, 2006 at 5:12 PM / IP Logged

Try this, when flashing the hood pin, Immediately and very very quickly just tap the hood pin right after you let it up in the first step. do this vey quickly and just a tap should put it into program mode and your park lights should stay on for you.

start

Member - Posts: 4

Joined: January 01, 2006

Location: Canada

Posted: January 01, 2006 at 5:20 PM / IP Logged

i did all that but it's not doing anything the manual just doesn't give me any real direction on trouble shooting the prob even tryed to reset the brain but that did nothing.

start

Member - Posts: 4

Joined: January 01, 2006

Location: Canada

Posted: January 01, 2006 at 5:26 PM / IP Logged

i was told that lots of guys have problems with getting this starter working are they just cheap or made so that you have to get them installed where you buy them?

muaiad97

Copper - Posts: 207

Joined: April 08, 2003

Location: Canada

Posted: January 01, 2006 at 5:58 PM / IP Logged

the prostart its a good remote starter and its very easy to program it and u know i program the remot to the brain befor i connected to the car just do what they say in the manual ane u will get it work .

start

Member - Posts: 4

Joined: January 01, 2006

Location: Canada

Posted: January 01, 2006 at 8:45 PM / IP Logged

thank you for the help i got it to work.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

prostart 3400 car starter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.