Ultra start 4500, 2005 honda crv

Home / the12volt's Install Bay / Car Security and Convenience / Ultra start 4500, 2005 honda crv (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

wscovil

Member - Posts: 15

Joined: January 01, 2006

Location: United States

Posted: January 02, 2006 at 2:19 PM / IP Logged

I just Installed an Ultra start 4500 Im having a problem getting it to work ..The parking lights keep blinking and the horn keeps going off. parking lights stay on when the car is running too! it's a 2005 honda crv ...anybody have any ideas"

Thanks

Wayne

gus1

Gold - Posts: 1,013

Joined: October 15, 2003

Location: Canada

Posted: January 02, 2006 at 4:20 PM / IP Logged

Did you do door locks?

Gus

Wherever I go, that is where I end up......

wscovil

Member - Posts: 15

Joined: January 01, 2006

Location: United States

Posted: January 02, 2006 at 5:17 PM / IP Logged

No i didnt do the door locks ..The only other thing that i can think of ,is maybe i didnt get the tach wire on the right spot

Wayne

gus1

Gold - Posts: 1,013

Joined: October 15, 2003

Location: Canada

Posted: January 02, 2006 at 5:29 PM / IP Logged

Do the door locks. Car arms with lock, disarms with unlock. Locks are over on the passenger's side, top of the fusebox. Test using the passenger's switch. Make the starter unlock before crank, lock after.

As far as tach goes... there will be a blue wire on a connector taped to a harness on the driver's side of the engine compartment. That is your tach wire.

The parking lights should come on with remote start and stay on if you hooked them up.

Gus

Wherever I go, that is where I end up......

wscovil

Member - Posts: 15

Joined: January 01, 2006

Location: United States

Posted: January 02, 2006 at 6:01 PM / IP Logged

Do you know if i'll have to use relays? also when i start the car with the key the parking lights stay on ,Is this normal?

Thanks for the help

Wayne

gus1

Gold - Posts: 1,013

Joined: October 15, 2003

Location: Canada

Posted: January 02, 2006 at 9:26 PM / IP Logged

Shouldn't need relays. They are negative trigger, most alarms out there have negative door lock outputs.

Did the parklights come on before the remote starter was installed?

Gus

Wherever I go, that is where I end up......

wscovil

Member - Posts: 15

Joined: January 01, 2006

Location: United States

Posted: January 03, 2006 at 2:58 PM / IP Logged

I hooked up the locks and it still doesnt work ..The parking lights just keep flashing and the two leds on the antenna keep flashing until i start the car . Then they stay solid but the parking lights still flash ..any ideas??

thanks for the help

Wayne

gus1

Gold - Posts: 1,013

Joined: October 15, 2003

Location: Canada

Posted: January 03, 2006 at 3:30 PM / IP Logged

Hit unlock on the remote? Perhaps the alarm is auto arming...

Gus

Wherever I go, that is where I end up......

wscovil

Member - Posts: 15

Joined: January 01, 2006

Location: United States

Posted: January 03, 2006 at 3:54 PM / IP Logged

Gus,any button that push on the remote ,And all that happens is the little key icon flashes on the remote.The doors dont lock or unlock or any thing ...Maybe i got a defect unit??..been trying to get in touch with tech support but no such luck yet ..

Wayne

gus1

Gold - Posts: 1,013

Joined: October 15, 2003

Location: Canada

Posted: January 03, 2006 at 4:17 PM / IP Logged

The parklights wouldn't happen to be flashing 7 times, would they? Sounds like the unit is in service mode (been about 3 years since the last Ultrastart pice that I have done)

Gus

Wherever I go, that is where I end up......

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.