K9-Classic installation manual

Home / the12volt's Install Bay / Car Security and Convenience / K9-Classic installation manual (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

witxp

Copper - Posts: 51

Joined: April 25, 2005

Posted: January 14, 2006 at 1:09 PM / IP Logged

Hi, does anyone have the installation manual manual for the K9-Classic? When it was installed we only got the operation guide. Now I wanted to add a remote starter to it myself.

I found this from another thead but it is for the extended version. Not sure if they use the same color codes and wiring diagrams.

http://www.wiringinstructions.com/install_guides/k9/k9-classic-e.pdf

Thanks

mike swanson

Copper - Posts: 290

Joined: January 28, 2003

Location: United States

Posted: January 14, 2006 at 6:05 PM / IP Logged

Most remote starts have a - trigger in to activate it

If you adding a R/S to somthing els then all you need is the - trigger out from what your adding to

So just test the unit for a - output. it may be a cut off wire from when the 1st person installed the K9

Look for wires that are not connected

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: January 14, 2006 at 7:05 PM / IP Logged

Basically the same:

http://www.wiringinstructions.com/install_guides/k9/k-9classic.pdf

Don't Learn from Others Mistakes

You Might Be the One That Knows.

witxp

Copper - Posts: 51

Joined: April 25, 2005

Posted: January 14, 2006 at 9:55 PM / IP Logged

Thank you very much. K9-Classic installation manual -- posted image.

witxp

Copper - Posts: 51

Joined: April 25, 2005

Posted: January 14, 2006 at 10:12 PM / IP Logged

mo12v wrote:

Basically the same:

http://www.wiringinstructions.com/install_guides/k9/k-9classic.pdf

I was going over the pdf file and was a little confused at how the door locks are being triggered to lock/unlock. Can someone clarify this for me?

Thanks

witxp

Copper - Posts: 51

Joined: April 25, 2005

Posted: January 14, 2006 at 10:14 PM / IP Logged

Just realized it's a 4pin connector that's not listed on the pdf file.

Thanks

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: January 15, 2006 at 12:28 PM / IP Logged

Usually only 2 wires are on the Plug:

GREEN is Lock

BLUE is UNLock

If you have the 4 wire Plug:

Pink is second Unlock

Blue is 1st Unlock

Green is Lock

Red is 12 Volts + Constant for Relays

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

K9-Classic installation manual

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.