central locking kit

hi all, im new to the site, my name is danny, i have a ford fiestaon a M reg 1994 , ive just fitted a shark car alarm as i cant really afford much else, and i have a central locking kit for it, the car alarm has one output wire for the central locking and the central locking has a lock and unlock wire.

i was told by maplins, which is where i got the alarm and central locking kit from that i needed a 5 pin relay switch now i no that i put the central locking output wire from the alarm into the input on the relay, and that the lock wire goes on one side and the unlock wire goes on the other side, but what 2 wires go into the coil to make the whole thing work??????

please i really really really need your help.

thank you

Danny :D

If you are using 2 wire Actuators

i am using 5 wire actuators, so how will i need 2 wire it up????? i think i read in the instructions sumwhere that the central locking kit is ground active????? what ever that means im not sure??? wot will i need then in total to work this system.

thanx