alarm problems

Home / the12volt's Install Bay / Car Security and Convenience / alarm problems (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

seefu

Member - Posts: 4

Joined: February 16, 2006

Location: Australia

Posted: February 16, 2006 at 8:37 PM / IP Logged

i took replaced the battery on a remote for my aftermarket alarm

and now the alarm wont respond to the remote

the alarm system is an alarm and immobiliser in one so now i cant drive my car either

please help if u may know a solution

seefu

Member - Posts: 4

Joined: February 16, 2006

Location: Australia

Posted: February 16, 2006 at 8:44 PM / IP Logged

by the way, the actual alarm unit has been untouched and was working perfectly.

i have tried disconnecting and reconnecting the batteries but that still did not work

mrcllusb

Copper - Posts: 489

Joined: September 06, 2005

Location: Georgia, United States

Posted: February 16, 2006 at 8:52 PM / IP Logged

Does you remote have a light on it??Check and see if you installed the battery correctly.If so,you may have lost your programing in the remote.You'll need to enter the alarm programming mode and reprogram your remote..

"ole blake"

seefu

Member - Posts: 4

Joined: February 16, 2006

Location: Australia

Posted: February 16, 2006 at 8:58 PM / IP Logged

thanks for replying mrcllusb

the light on the remote does work and does flash. and how do i enter the alarm programming mode and reprogram my remote?

seefu

Member - Posts: 4

Joined: February 16, 2006

Location: Australia

Posted: February 18, 2006 at 8:36 PM / IP Logged

anoyone know anything about a Cobra 7190?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alarm problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.