the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

05 honda accord, remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
Irnotslow 
Member - Posts: 45
Member spacespace
Joined: October 06, 2003
Location: United States
Posted: February 01, 2006 at 4:08 PM / IP Logged  
I am installing a RS in this car.   I have found the info  https://www.the12volt.com/installbay/forum_posts.asp?tid=52488  on the unlock motor  what does  "5wi"  mean.  I would lock to use the pass unlock motor as a trigger to start the RS starter sequence.  Any advise is greattly appreaticated.  Thank you
irnotslow
tex12gage 
Copper - Posts: 83
Copper spacespace
Joined: September 28, 2005
Location: United States
Posted: February 01, 2006 at 4:20 PM / IP Logged  
5wi = 5 wire set up
tex
JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: February 01, 2006 at 4:52 PM / IP Logged  
Are you aware the factory remote doesn't work when the car is running?
Irnotslow 
Member - Posts: 45
Member spacespace
Joined: October 06, 2003
Location: United States
Posted: February 02, 2006 at 3:38 PM / IP Logged  

yes I am aware the the Remote does not work while car is running.  I am still a little confused on the 5 wirw set up. Let me try to clearify my delima....I am using a Add-on ( slave ) RS I need 1 or 2 (-) neg pulses within 3 secinds to iniaite the RS sequence. I chose the pass un lock door motor.  When I press the cars keyless ( engine off) 1X the drivers door ulocks, 2x the pass door unlocks, 3 times the pass door motor is hit a second time. That is why i need to find the pass door unlock motor wire.  I know how to use a relay to change the (+) puluse from the door lock to the (-) i need for the RS.

Any help please

irnotslow
Irnotslow 
Member - Posts: 45
Member spacespace
Joined: October 06, 2003
Location: United States
Posted: February 11, 2006 at 11:33 AM / IP Logged  

Hello I am having trouble witha rs in a 2005 honda accord.  This system i am installing is a slave rs. It requires 1 or 2 neg pulses with 3 seconds as a trigger  to begin the strat sequence.  I have choosen to use the passanger unlock circut. I have located the lock motor wires in a 3 wire connector just behind the glove box. If I connect my trigger wire to the pink/blue wire (-) out put AND push the DOOR button the rs starts the car. but if I use the factory remote it does not work.  Also if the factory alarm in activate will starting the car via rs cause the alarm to trigger?  ( just in case if i use the lock wire/button on my factory remote.

Here is the link to the wiring diagram https://www.the12volt.com/installbay/forum_posts.asp?tid=52488

thank you

irnotslow
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: February 11, 2006 at 1:05 PM / IP Logged  

Have you tried pushing the Lock button the number of times for the R / S?

You may not have a long enough Negative Pulse or not strong enough.

I have :

Motor LockYELLOW/BLACKGREEN CONN LEFT OF FUSEBOX
Motor UnlockYELLOWGREEN CONN LEFT OF FUSEBOX
Drv Door UnlockYELLOW /GREENGREEN CONN LEFT OF FUSEBOX
Meter these wires using your Remote to see if they have Negative Pulse
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
tjdurham 
Copper - Posts: 180
Copper spacespace
Joined: July 25, 2003
Location: United States
Posted: February 11, 2006 at 7:28 PM / IP Logged  
your car knows it is locked and the keyless wont do a 2nd pulse cause it knows that its locked
tj
Irnotslow 
Member - Posts: 45
Member spacespace
Joined: October 06, 2003
Location: United States
Posted: February 16, 2006 at 9:49 PM / IP Logged  
As you have been aware I have been working in an 05 Accord. I have decided to buy a Normal, Not Slave R/S.  Must I hook up the factory Disarm wire to start this car under R/S while the car is locked and factory alarm armed?
irnotslow
gus1 
Gold - Posts: 1,013
Gold spacespace
Joined: October 15, 2003
Location: Canada
Posted: February 16, 2006 at 10:13 PM / IP Logged  
Yes.
It is in the driver's door.
You may as well do arm as well, if you are pulling one wire, may as well make it 2.
Gus
Wherever I go, that is where I end up......
Irnotslow 
Member - Posts: 45
Member spacespace
Joined: October 06, 2003
Location: United States
Posted: February 19, 2006 at 10:04 PM / IP Logged  

Where is the module located in the door?  Must I remove the door panel? Is this the only way to disarm the factory alarm? How about permanemtly?

Irnotslow

irnotslow
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer