the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

DEI 556U Conflict


Post ReplyPost New Topic
< Prev Topic Next Topic >
Trav3D1 
Copper - Posts: 146
Copper spacespace
Joined: April 06, 2003
Location: United States
Posted: February 22, 2006 at 7:19 PM / IP Logged  

I just installed a BOA 165B and DEI 556U on a 2004 Ford Explorer.  For some reason the 556U conflicts with the second factory key if I attempt to start the truck the traditional way.

No problems at all if I remote start the truck, but when I use the factory key and turn the ignition, it will not starts.

Any suggestions???

Trav
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: February 22, 2006 at 7:58 PM / IP Logged  
What do you have the BLUE wire on 556 going to on BOA?
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
bazzgazm 
Copper - Posts: 113
Copper spacespace
Joined: June 06, 2004
Location: United States
Posted: February 22, 2006 at 9:09 PM / IP Logged  
Sounds about right, your theft light is probably flashing when you try to start it by key. This would show you that the 556U is NOT turning off. It should only come on when the car is remote started. Connect the blue wire to - output durring remote start.
Trav3D1 
Copper - Posts: 146
Copper spacespace
Joined: April 06, 2003
Location: United States
Posted: February 23, 2006 at 1:07 PM / IP Logged  
I have the blue wire ( (-) 200mA Status Output) on the Boa connected to the blue wire on the 556U.  What bazzgazm makes sense, but I'm not certain why this problem is occuring since I have the proper wire connections.
Trav
another-kelly 
Silver - Posts: 618
Silver spacespace
Joined: July 11, 2004
Location: United States
Posted: February 23, 2006 at 1:51 PM / IP Logged  
you didn't hook up the pink ignition wire off the 556U did ya?
Trav3D1 
Copper - Posts: 146
Copper spacespace
Joined: April 06, 2003
Location: United States
Posted: February 23, 2006 at 3:49 PM / IP Logged  
Yes I did.  Could that be the problem?
Trav
Ravendarat 
Platinum - Posts: 2,806
Platinum spacespace
Joined: February 23, 2004
Location: Canada
Posted: February 23, 2006 at 3:56 PM / IP Logged  
That IS the problem. Disconect that wire and it will work fine
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer