Smart windows 4

Home / the12volt's Install Bay / Car Security and Convenience / Smart windows 4 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ledmymotor

Member - Posts: 2

Joined: February 27, 2006

Location: United Kingdom

Posted: February 27, 2006 at 12:48 PM / IP Logged

Hi guys,

I would like to start my first post on a positive note, but sadly im in need of a bit of help!

Have just installed smart windows 4 into a 1999 Ford Fiesta (clifford concept 650 alarm).

Connected the cliff net wizard, started the programing, all seems fine, windows seem to program ok. I go to roll the windows down, seems ok, but rolls up about an inch at a time, i have to press the button about 6 times to close the window properly!

Also, if i arm the system with the windows down, they auto roll up about an inch and stop again. (and the one touch up / down doesnt work either).

Is there something stupid im missing, in either the wiring or programming? Wires are connected to the motor side.

Any ideas would be greatfully appreciated!

James

ledmymotor

Member - Posts: 2

Joined: February 27, 2006

Location: United Kingdom

Posted: February 27, 2006 at 2:04 PM / IP Logged

Sorted!!

After programming, pushed the done button. (cliff net) Then either apply or ok to save - didnt work

then i repeated the above, but didnt press ok or apply, just quit the program, and it works?!! strange.

mrcllusb

Copper - Posts: 489

Joined: September 06, 2005

Location: Georgia, United States

Posted: February 27, 2006 at 4:54 PM / IP Logged

Well atleast you got it working..Count ur blessings..

"ole blake"

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Smart windows 4

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.