Compustar 2WSS-AS Turbo Mode Not Working

Home / the12volt's Install Bay / Car Security and Convenience / Compustar 2WSS-AS Turbo Mode Not Working (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

evilevo

Member - Posts: 1

Joined: March 28, 2006

Location: United States

Posted: April 04, 2006 at 12:22 PM / IP Logged

I just installed the Compustar 2WSS-AS into my 2006 Mitsubishi Evolution MR, the problem is i cant get the turbo timer mode to work?

I DO have a few wires not hooked up, but the Ebrake wire and the brake wire are connected. i also went through the programming to activate turbo mode and the box on the remote is black. Is there anything i am missing? does the tachometer wire need to be connected? i dont have it connected right now because i dont want auto-start. any help would be great.

Thanks in advance to anyone who could help.

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: April 04, 2006 at 5:13 PM / IP Logged

Yes, the tach wire needs to be connected.

If you list out all the wires you did connect I can tell you if you will need any more.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Compustar 2WSS-AS Turbo Mode Not Working

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.