5 wire reverse question

Wiring up a keyless, everytime I hit the remote, it blows the fuse on the power feed to the relays....and of course the locks dont do a thing.  Using a keyless with negative outputs only.

Would be great if you Posted more info on Vehicle:

Be sure you are using SPDT Relays:

2 SPDT RELAYS:

Cut LOCK  & UNLOCK Wire in Half.

One Half goes to SWITCHOne Half goes to ACTUATOR

Relay 1

LOCK:

PIN 87 =  12 Volts ( + ) ConstantPIN 87a =  wire from Door Lock SwitchPIN 30 =  wire to ActuatorPIN 85 = Negative Lock Output from AlarmPIN 86 = Constant 12 volt ( + )

Relay 2

UNLOCK:

PIN 87 =  12 Volts ( + ) ConstantPIN 87a =  wire from Door UnLock SwitchPIN 30 =  wire to ActuatorPIN 85 = Negative UnLock Output from AlarmPIN 86 = Constant 12 volt ( + )

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.