the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

04 mailbu disarm factory security


Post ReplyPost New Topic
< Prev Topic Next Topic >
xtremej 
Gold - Posts: 1,440
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 24, 2006
Location: United States
Posted: June 20, 2006 at 11:36 AM / IP Logged  
I installed a remote start on a 2004 malibu. The factory security goes off with this scenario, locked at the door switch and closed, unlocked by remote start remote. My question is if I pulse the ignition will it disarm the factory alarm so it doesn't go nuts? Or should I have them only use the aftermarket remote to control the locks? 
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: June 20, 2006 at 4:10 PM / IP Logged  
If you use the aftermarket system to pulse the ignition AND the transponder bypass, it should work.
Or, as you say, just tell them to pick one of the remotes for the locks, and stop using the other one.
sparkie 
Platinum - Posts: 2,061
Platinum spacespace
Joined: November 06, 2003
Location: Canada
Posted: June 20, 2006 at 7:59 PM / IP Logged  
There is a light green wire in the driver's kick panel coming in from the door. A negative pulse through a 620 ohm resistor will disarm the alarm. A second pulse will unlock the doors. Use a relay to insure a proper ground signal through the resistor.
sparky
ushank 
Member - Posts: 44
Member spacespace
Joined: April 23, 2006
Location: United States
Posted: June 20, 2006 at 10:52 PM / IP Logged  
Try using a by-pass module. Peripheral PPLXR (PLGML)  You can also try the directed peice that can be picked up at any of your local alarm shops.
xtremej 
Gold - Posts: 1,440
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 24, 2006
Location: United States
Posted: June 21, 2006 at 10:18 AM / IP Logged  
Cool thanks for the reply.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer