Clifford Intelliguard 8000

Home / the12volt's Install Bay / Car Security and Convenience / Clifford Intelliguard 8000 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

black-n-blue

Member - Posts: 10

Joined: June 28, 2006

Location: United States

Posted: July 07, 2006 at 4:47 PM / IP Logged

I have the IG8000,,, it is a used system, and I am trying to get into the programming mode, but I only have the unit on my bench until I can verify functionality. I have tried all things I can think of, but I cannot get it to enter programming. So far, I have tried turning key on, enter pin code, then hold the * for 10 seconds. I see on some systems, you have to open a door,,, do I need to open and close a door sensor as well before it will let me in to program it? I ordered my Cliffnet cable, but I don't have it just yet, but I may have to wait for it to get here... Thanks in advance for any assistance!

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: July 07, 2006 at 8:12 PM / IP Logged

go to teh down laod section for the install guide, it has program info in it.

black-n-blue

Member - Posts: 10

Joined: June 28, 2006

Location: United States

Posted: July 07, 2006 at 8:27 PM / IP Logged

Did that, still can't get in.... Probably someone has changed the valet code..

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: July 08, 2006 at 6:42 PM / IP Logged

check to see if the atenna is plug it.

black-n-blue

Member - Posts: 10

Joined: June 28, 2006

Location: United States

Posted: July 15, 2006 at 12:15 AM / IP Logged

Got my wizard cable today,,, and as I suspected, the valet code had been changed..... Now that I know what it is, I can tweak everything.... The wizard software is very cool too!!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford Intelliguard 8000

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.