Help---Clifford remote learning

Home / the12volt's Install Bay / Car Security and Convenience / Help---Clifford remote learning (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Wess

Member - Posts: 7

Joined: December 20, 2002

Location: United States

Posted: January 13, 2003 at 7:14 PM / IP Logged

I have a 1999 suburban and had a clifford alarm installed (in 1999). (Haven't been able to confirm which alarm model was installed, but after comparing features on clifford.com I think it's either a concept 100 or intelliguard 7000. I have a 5 button remote on which the red light stays on whenever you press a button and I also have a 4 button remote that doesn't seem to work at all. I have purchased a new 4 button remote which I can't get programmed. Batteries are all brand new and checked out with a tester. I checked out clifford.com and got the programming instructions for both models . The instructions are the same for both models. When I follow the instructions (enable the valet mode then hold down the * until you hear 1 chirp ...) I NEVER hear the chirp. The fuses have all been checked. CAN ANYONE HELP ME????

Thanks

10nesne1

Silver - Posts: 284

Joined: June 19, 2002

Location: British Columbia, Canada

Posted: January 13, 2003 at 7:59 PM / IP Logged

http://www.directed.com/guides/manuals/ig/clifford/concept100_install.pdf

save this installation guide and the remote programming is on page 9.

good luck

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Help---Clifford remote learning

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.