Progressive unlocking, Hornet 742T

Home / the12volt's Install Bay / Car Security and Convenience / Progressive unlocking, Hornet 742T (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dbd5000

Member - Posts: 4

Joined: July 31, 2006

Posted: July 31, 2006 at 11:28 AM / IP Logged

Vehicle - 1998 Ford F150

I have installed the DEI Hornet 742T. Everything is working fine except the manual talks about progressive unlocking (drivers door first than passenger door with a second push of disarm button). The subject shows up under installation options, but does not give any further how-to. Right now they both unlock at the same time. I have cut the pink / YELLOW (power lock) and pink/green (power unlock) and attached the alarm wires for a type C (reversing polarity system) as per the installation guide.

Can this function be accomplished within the unit by changing wires or is it something I need to add a relay for?

Thanks in advance for any input.

dbd

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: July 31, 2006 at 12:13 PM / IP Logged

Does the unit have a "second unlock" or a "drivers priority" unlock youll need 3 relays one for unlocking the drivers door, one for unlocking the pass. door, and one for locking ALL doors.Check the install manual for a "different" unlock wire. I am NOT a DEI guy, so I do not know off the top of my pea brain. I did some reading, your unit has built in lock relays, thats too bad. Look at one of the 3 aux. outputs see if one of those could be used as a second unlock trigger. I read some more, and it does say in the owners manual Progressive unlocking is an option.....so ther MUST be a seperate trigger for priority unlocking....

dbd5000

Member - Posts: 4

Joined: July 31, 2006

Posted: July 31, 2006 at 1:12 PM / IP Logged

Thanks for the reply

After further looking I found this in the install manual.

If the pic did not come out correctly it says there is (-) second unlock wire.

Progressive unlocking, Hornet 742T -- posted image.

I am not real sure what to do with H3/1 (blue wire). I am assuming I need to run it over the passenger kick panel and cut the unlock wire and attach it there.

Thanks

dbd

dbd5000

Member - Posts: 4

Joined: July 31, 2006

Posted: July 31, 2006 at 1:14 PM / IP Logged

wow

Sorry

That didn't work - can it be deleted?

dbd

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: July 31, 2006 at 11:11 PM / IP Logged

look at page 19 in th einstall guide aux harness has a 2nd unlock wire

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Progressive unlocking, Hornet 742T

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.