the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2002 Trailblazer


Post ReplyPost New Topic
< Prev Topic Next Topic >
pnr001 
Member - Posts: 7
Member spacespace
Joined: December 18, 2002
Location: United States
Posted: January 20, 2003 at 1:29 AM / IP Logged  

Just installed a DIY Hornet remote start and a PLDATA in my Trailblazer and everything went fine except that when the truck is remote started and the parking brake is set, the parking lights flash after the truck starts.  If the parking brake is released, the headlights will flash after remote start.  The parking lights flash once to confirm remote start when you press both buttons.  Any ideas... When the key is put in the ignition and turned to the run position, everything goes back to normal.  I unlock the car doors before remote start......

Robert

Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: January 20, 2003 at 6:36 AM / IP Logged  
The DEI stuff flashes the parking lights on and off while the car is running under remote start......this looks absolutely stupid.  Go into programming and change the parking lights to constant.
pnr001 
Member - Posts: 7
Member spacespace
Joined: December 18, 2002
Location: United States
Posted: January 20, 2003 at 10:12 AM / IP Logged  

Thank you Chris. Can you tell me how to get into the programming mode.  The instructions don't say.

Thanks, Rob

Bnluis 
Silver - Posts: 578
Silver spacespace
Joined: December 24, 2002
Location: New York, United States
Posted: January 22, 2003 at 8:19 PM / IP Logged  
turn key to ignition, turn key off, then press valet switch in the Hornet 4 times then one more time and hold it.(0r 5 times just holit on the last one). then press button 2 on the remote LED will be off. that will set the remote stater for constant parking lights.(LED in the Hornet brain next to the blue valet switch port) if you press button one it will stay on for blinking lights. GOOD LUCK.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer