the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

ford superduty, remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
fastgracey 
Member - Posts: 3
Member spacespace
Joined: October 14, 2006
Location: United States
Posted: October 14, 2006 at 10:36 AM / IP Logged  
Anyway here is the story I am installind a bunch of remotestart/alarms prostar 3300's on the work trucks ford superduty's and chevy/gms 2500's all diesels.I am working on chevy.First the door lock unlock output doesnt work then when you turn the key to run position the truck starts bucking and trying to start.Then I had key in ign on run position so system would not keep rearming then I shut door but it was locked so I go get spare key put into doorlock and turn to unlock and freaking truck starts.Iam lost I have no clue but here is what I found all my ign/power wires are correct and I get right readings as well as with all triggers for hood switch ,lights horn etc when all is unplugged fron alarm.But when plugged in they get goofy like ign 1 output stayes on constant.Also this unit looks for tach sense wire needing 1-6 volts AC to program tach function is no wait to start wire on unit. was getting 7 volts then saw 12 dc.also lights dont flash right and wont go into valet I think I have fried 2 of them.Anywasys I figure I will order new system and in the meantime wire up the passlock module from DEI 457gw when I read instructions it says very bluntly do not connect to dash frame for ground you have to go to drivers kick panel to get a ground.Why is this and is this somehow running power through backfeeding all my modules burning them up and also freaking truck out i am lost
h2oskierfl 
Copper - Posts: 87
Copper spacespace
Joined: April 20, 2005
Location: United States
Posted: October 14, 2006 at 11:06 AM / IP Logged  
Vehicle Info please. Are you using the 457GW for the locks also? Depenging on the truck info, the locks may be part of the data bus system.
fastgracey 
Member - Posts: 3
Member spacespace
Joined: October 14, 2006
Location: United States
Posted: October 14, 2006 at 11:07 AM / IP Logged  
where else can I get tach sense wire for 2006 ford diesel besides under dash at WHITE/ grn wire I need to get between 1-6 vlots AC AT IDLE AND RAISE WHEN GAS PEDAL IS STEPPED ON   for the remote start system but only seeing .5 volts AC
fastgracey 
Member - Posts: 3
Member spacespace
Joined: October 14, 2006
Location: United States
Posted: October 14, 2006 at 11:19 AM / IP Logged  
I am putting in a pro start 3300 remote start alarm iam trying to hook up dome light but it says to use door trigger on truck diagram I have but the diagram only gives me the positive door trigger and the dome light is a negitive so I need to know what color is the negitive trigger

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer