the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

98 blazer remote start problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
desh187 
Copper - Posts: 310
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 13, 2002
Location: Canada
Posted: November 11, 2006 at 1:00 AM / IP Logged  
I installed a black widow z5 2 way pager alarm/autostart with a gm-sl (self learn)transponder bypass unit.When the vehicle is remote started,it seems as the auto transmission does not shift gears properly.works normal when ign key is used.
I have powered all the ign and accessories(pink,thin white,brown and orange wires)
What should i do next?Has anyone experienced a problem like this?
Thanks.
qdaddy 
Copper - Posts: 133
Copper spacespace
Joined: March 06, 2006
Posted: November 11, 2006 at 1:28 AM / IP Logged  

well pink should be first ign

white 2nd ign

orange accessory

the white wire may be crossed with the accs out instead of the true ign must remember true ign does not dip during crank like accs wire does thus causing the tranny not to power up properly check to make sure they are in right order this is common mistake98 blazer remote start problem -- posted image.

qdaddy 
Copper - Posts: 133
Copper spacespace
Joined: March 06, 2006
Posted: November 11, 2006 at 1:30 AM / IP Logged  
oh and on chevy brown (2nd accs) not necessary unless tryin to power the radio or windows durin RS
lsondubz 
Copper - Posts: 193
Copper spacespace
Joined: September 20, 2005
Posted: November 11, 2006 at 8:54 AM / IP Logged  
Yes, make sure you have the 2nd IGN(white) powered during crank!
master5 
Silver - Posts: 1,123
Silver spacespace
Joined: October 10, 2006
Location: United States
Posted: November 11, 2006 at 12:44 PM / IP Logged  

Yes..on late model GM trucks the trans will have problems if the 2nd ignition is not hooked up...It is white BUT at times it is Pink/white. You must dig through the igntion harness, look for these colored wires, verify, and make sure it's connected well.

Your trans problem will be fixed during RS


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, June 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer