the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Wiring Problems


Post ReplyPost New Topic
< Prev Topic Next Topic >
dkeenan 
Copper - Posts: 52
Copper spacespace
Joined: May 20, 2002
Location: Ireland
Posted: May 20, 2002 at 7:08 PM / IP Logged  

Can someone please tell me what the following wires are for.

auxiliary "-" output

Armed / Disarmed Gnd output

Aux. sensor I/P "-"

HotRod53F100 
Copper - Posts: 84
Copper spacespace
Joined: May 12, 2002
Location: United States
Posted: May 20, 2002 at 8:03 PM / IP Logged  
I think that we need more information..what are we working on?? The  Aux Pwr out usually turns on an external device such as an Amp or an equalizer.
HotRod
dkeenan 
Copper - Posts: 52
Copper spacespace
Joined: May 20, 2002
Location: Ireland
Posted: May 21, 2002 at 6:11 PM / IP Logged  

I purchased my alarm through a friend in Taiwan. It has many feature including the following - passive locking, Panic, Valet mode, shock sensor, Engine override, Anti-hijack, Dome light supervision.

There is no wiring Diagram, just a list of the following wires,

grey  -  siren

white  -  ignition

thin red  -  dome light supervision "-" output

Purple  -  auxiliary  "-" output

pink  -  indicator

Orange  -  door (+)

red  -  +12v

green  -  pin switch

pink  -  indicator

blue  -  door (-)

yellow  -  armed / disarmed gnd output

black  -  ground

brown  -  aux. sensor I/P "-"

BLACK/ white  -  valet switch I/P ("-")

C.D.L.

green  -  lock common

orange  -  unlock common

yellow  -  lock n.o.

yellow/black  -  unlock n.o

black  -  lock n.c

BLACK/ white  -  unlock n.c

Naghtydog posted the following for me:

The locking is neg pulse ( BROWN / red and BROWN / white)

+15 = Black
+30 = Red
+50 = RED / Black at ignition switch
Indicators = BLACK/ Green and BLACK/ White  - at yellow plug
Doorswitches = BROWN / White - at yellow plug
Boot = BROWN / White - at yellow plug
Fule pump = Blue/Red in N/S Sill loom

Can someone please help me with the wiring for the central locking.

Also it says there is an immobiliser function.

How is this posible with the wires listed above.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, June 10, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer