2004 Mazda 3, remote start
Home /
the12volt's Install Bay /
Car Security and Convenience / 2004 Mazda 3, remote start (
Topic Closed)
Topic Closed)
Members
Search
Register
Login
Posted: December 18, 2006 at 4:37 PM / IP Logged
Posted: December 20, 2006 at 1:59 PM / IP Logged
Three days later but here goes:
Start by prying the plastic tab down at the top of the hood release lever to pull the lever towards you and remove the screw which holds the panel but was hiding behind the lever.
Start by pulling the panel at the TOP towards you by sticking your finger between the panel and the steering column. Do this at the left and right of the steering.
Slowly open the panel as if it were on hinges at the bottom. Watch the hook on the bottom right. Panel can now be removed. Remove the connectors from the panel.
Discard the panel (just kidding 
).
Re-installation is opposite of removal.
Prepare your future. It wasn't the lack of stones that killed the stone age.Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Sunday, July 13, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Sunday, July 13, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
