the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

06 bmw z-4 locks


Post ReplyPost New Topic
< Prev Topic Next Topic >
txaggiemp 
Member - Posts: 8
Member spacespace
Joined: May 28, 2005
Posted: December 19, 2006 at 4:22 PM / IP Logged  
anybody install keyless on a 06 z-4? we have the remote start working but no-go on the locks. i have the directech sheet but that hasen't helped at all. i'm looking for first hand knowledge here, i've been through it with directed and they are no help.
the customer is not always right
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: December 20, 2006 at 12:27 AM / IP Logged  
LOCK Blue/red At General module behind glovebox   - 
 In center plug
 UNLOCK White At General module behind glovebox   - 
 In center plug
How could this be difficult? Is the module NOT there? Can you not find the wires this color? Do they NOT test properly?
jihadmatar 
Member - Posts: 8
Member spacespace
Joined: October 31, 2006
Posted: February 17, 2007 at 2:00 PM / IP Logged  

hello, this is jay and i install alarms and starters(basic mecp).

u seem that you know your stuff. i am working on a 1999 a4 2.8 quattro.

have a problem w door locks parts. i am installing the xs- 900s systems. according to its wiring diagarm i need to cut the main wire that is going form the vacuum pump in the trunk to the door switch. this wire should show 12v with door unlocked and 0 when locked. do you know what color or location? or am i wrong all together. any help is greatly appreciated. 

email address is jihadmatar@yahoo.com

thanks.

howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: February 20, 2007 at 4:57 PM / IP Logged  
NO NO NO  Check plugs in driver or passenger footwell look for plug on looms coming out of dor into plug, its low current neg for lock and unlock and hold the lockwiire for window close. THAT SIMPLE!06 bmw z-4 locks -- posted image.
jihadmatar 
Member - Posts: 8
Member spacespace
Joined: October 31, 2006
Posted: February 20, 2007 at 5:09 PM / IP Logged  

howie ii,

thanks for the help. what did you mean at the end though by: hold the lock wire for window close. what does this means.

thanks again,

jay. 

howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: February 21, 2007 at 3:47 AM / IP Logged  
Use a timed (about 5 secs) neg output and join to lock wire, see installation manual for that alarm.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer