Diode type

Home / the12volt's Install Bay / Car Security and Convenience / Diode type (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

gassaver

Member - Posts: 34

Joined: December 21, 2006

Location: United States

Posted: December 23, 2006 at 11:29 AM / IP Logged

I'm going to be installing a alarm on my 95 honda civic cx hatchback. The car has (-) door triggers. And I have a feeling that I"m going to have to isolate both doors and my hatch. My question is, what diode and I'm going to need to isolate the doors. Or is just using the drivers side door enough that it is going to cover all doors when alarmed.

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: December 23, 2006 at 12:28 PM / IP Logged

DOOR TRIGGER LIGHT GREEN/ RED (-) IN DRIVERS KICK PANEL

i think the wire above will catch all doors, if i can recall. if not use 1n400x, i use 1n4001. can be purchase from radio shack. www.mouser.com have them, very quick shipper.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Diode type

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.