valet 562t in 2006 suburban

Home / the12volt's Install Bay / Car Security and Convenience / valet 562t in 2006 suburban (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

flyfishtx

Member - Posts: 6

Joined: March 19, 2007

Location: United States

Posted: March 22, 2007 at 3:50 PM / IP Logged

I have installed a 562T with a 457GW data module in my 2006 suburban, and need a little help with a couple of things. When I start the truck with the remote the parklights flash. When it gets dark outside and you start it with remote the headlights flash instead of the parklights. Is there a way to bypass this so just the parklights will flash even at night? Also, I cannot get the unlock drivers door only(second unlock output on 562T) to work like the factory remote. Can you help me?

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: March 23, 2007 at 10:08 AM / IP Logged

Parking lights: Set them to steady output instead of flashing lights. The headlights will still turn on at night because the truck turns them on when it is dark out and the ignition is on, but it will stop the annoying flashing.

The 457G does not have driver's door priority unlocking in it's software. To achieve this you would have to use the second unlock output from the 562T (H1 Blue) to the 457G unlock input. Then you would use the door unlock output (Door Lock Blue) to a 5-wire setup on the unlock side of the driver's door actuator.

Installer, IT support, and FFL. I need less hobbies.

flyfishtx

Member - Posts: 6

Joined: March 19, 2007

Location: United States

Posted: March 26, 2007 at 10:22 AM / IP Logged

Could I replace the 457GW with a 1700G? Does the 1700G do the drivers door unlock only? Is the 1700G worth investing in?

pro17

Member - Posts: 35

Joined: February 03, 2006

Location: United States

Posted: March 26, 2007 at 11:47 AM / IP Logged

try using the GM-SL2 from fortin. works great for me.

Twelvoltz

Platinum - Posts: 2,384

Joined: March 24, 2005

Location: New Jersey, United States

Posted: March 28, 2007 at 8:39 AM / IP Logged

If you really want the driver's priority unlocking then yes I would suggest a data module that can do it to save the aggravation of 5-wiring the driver's actuator.

The 1700G does offer driver's priority unlocking, I would also recommend looking into the GMDL-BP. I have had great success with this piece.

Installer, IT support, and FFL. I need less hobbies.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

valet 562t in 2006 suburban

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.