Command Start

Home / the12volt's Install Bay / Car Security and Convenience / Command Start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

TnT (Dean)

Member - Posts: 2

Joined: February 09, 2003

Posted: February 09, 2003 at 6:35 PM / IP Logged

I need a wiring diagram for a 97 gmc sierra for installing a cs 290 command start. Thanks in advance for any help.

TnT (Dean)

Member - Posts: 2

Joined: February 09, 2003

Posted: February 09, 2003 at 8:48 PM / IP Logged

Please!

I am in no way a mechanic so i dont even know where to begin, but i have a mechanic freind that is coming over to help me, but he has been out of the industry for a while, could someone please walk me through the steps to install the start and the door lock features, where the wires are located, sorry if this sound difficult but i have had this thing for a whike and want to get it installed.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 09, 2003 at 9:33 PM / IP Logged

| 12V|red |+ |ignition harness |

Notes:

*1 The pink/white does not exist on all models. *2 5 wire (type C) on the two door models, and positive trigger (type A) on the four door and keyless entry models. *3 Tach wire on the 6.5 Diesel is white at the instrument cluster. Diesel wait to start wire is dk. blue (-) located at the instrument cluster. *4 ECM located on drivers side inner fender well. Two plugs, white wire in plug marked white. *5 Make sure to enable second ignition wires for remote starts to prevent possible transmission damage and the check engine light from coming on.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Command Start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.