2006 tiburon door locks and 451m

Im having trouble determining the correct way to wire up the dei 451m to my door locks. Any help would be appreciated

According to DEI your system is a type F which means there is one wire that controls lock and unlock. They list this note too: "HYUNDAI, TIBURON, 2006, Power Lock The yellow wire will test when moving the driver lock knob, the blue wire will test when moving the passenger lock knob. The BCM (Body Control Module) is part of the fuse/relay box under the driver side dash." If this wire sees a ground pulse it locks the doors and if it sees nothing it unlocks the doors. Take a look at page 8 of this document and see if it doesn't clear it up for you.Installer, IT support, and FFL. I need less hobbies.