2007 doddge ram 2500 diesel

My alarm diagram tells me the following

6 PIN HARNESS

BROWN WIRE: Second Ignition output. This wire may instead be programmed for use as a second acc. or second starter wire.

ORANGE WIRE: ACC out put (+)

YELLOW: Ignition Out (+) connect to the main ignition wire that provides +12v when the ignition is on and while cranking the starter.

VIOLET: Starter Output (+). Connect to the vehicles starter wire.

20 PIN HARNESS

Yellow: +12V Ignition Input. The yellow wire must connect to a main ignition wire at the ignition harness. This wire must show +12V when the ignition is on and while cranking the starter. The voltage must not drop whe the car is starting.

BLUE/ORANGE: Ground when running output (-) 500mA. cconnect to an optional factory security bypass module if required.

Anyhelp would be appreciated.

Sgt. Singh USMC

i would take the truck to someone who knows how to do this as you can do a lot of damage on the new dodge chryslers if you dont know what you are doing there are a lot of thing on that pertitular truck that can make you life into a nightmare if you mess with them the multiplex sytems in that truck are quite complicated to an amature